For the first time, Edifier has brought cutting edge sound technology to a classic style. Edifier’s S2000Pro pays tribute of the speakers from the past with the elegant side wood panelling. These speakers elevate the classic style of bookshelf speakers to the next level of sound with modern sensibilities and advancements
Matte black paint with luxurious wood baffle plate, metallic surface grill, and gold pads underneath. S2000Pro exudes elegance and demands to be the centre of attention with both its style and sound.
Thick Wood Side Panels
The S2000Pro have 18mm thick wood side panels reducing the resonance and highlighting aspects of audio design you have never heard before. Wood processing is a time-consuming process. For us to achieve the 18mm flat plate, you need to start from a much thicker sheet of wood. After multiple polishing and smoothing treatments, the final product is made and it is glorious
Rich Low-Distorted Treble
The S2000Pro comes equipped with a rich low-distorted flat diaphragm tweeter. The flat diaphragm provides a fast response rate that gives inherent advantages such as excellent high frequencies that lower tiered bookshelf speakers do not provide
The high-strength low-distortion from the aluminium cone makes sounds unique and clear. The S2000Pro takes advantage of the DSP digital electronic crossover thanks to the help of German engineering of the KLIPPEL precise analysis system. This system is used so that the metal aspects of these speakers do not emit the sound of metal meanwhile taking advantages of the metal aspects. The energy-absorbing rubber hemming results in giving the 5.5-inch aluminium cone woofer a precise, clean, and low-frequency performance
The S2000Pro uses an application of new electro-acoustic technology. Taking advantage of two Texas Instruments digital processing DSP chips, TLV320AIC3254, the S2000Pro uses its miniDSP function to reach the culmination of incredibly loud and heavy bass. Independent of the electronic crossover and dynamic management, the S2000Pro offers precise control of frequency allocation for the bookshelf loudspeaker performance.
The onboard DAC (digital-to-analogue conversion) and ADC (analogue-to-digital conversion) of the S2000Pro has a built-in officially branded Burr-Brown PCM1802 Texas Instrument. The Burr-Brown DAC and ADC uses audio signalling that reaches towards 105dB signal to noise ratio (SNR). The analogue input signal uses traditional HiFi methods that are recognised by WIMA capacitors. This in turn ensures a lower signal loss. As for optical and coaxial inputs, the interface chip, PCM9211 also from Burr-Brown, supports a 24-bit 216-kHz high precision input digital audio signal.
Located on the back of the S2000Pro, there are three knobs for adjusting treble, bass and, volume. The master volume knob has precision adjustment and memory volume control set above a certain volume level.
Change the sound of your speakers at the press of a button. The S2000Pro has four on-board EQ settings: vocal, monitor, classic, and dynamic. The vocal setting pairs perfectly with watching people perform on TV.
S2000Pro uses three professional digital amplifier chips for producing the best sound in its class. The TAS5754 from Texas Instruments run independently from each other ensuring they do not cause interference while running their respective purpose. The first chip is in control of treble and bass, respectively driving both speakers. The second chip runs strictly the woofers of the S2000Pro using a PBTL (parallel to the bridge) connection which helps build power reserves. The last TAS5754 is dedicated to the amplifier output frequency of 768KHz. With the dedicated chip these speakers are fully optimise to reduce high frequency distortion and local noise.
Edifier strives for audio excellence in all products. All our products need to meet a standard of quality with low distortion audio playback and must achieve a high sample rate. The S2000Pro from Edifier is the epitome of all of Edifier’s HiFi audio equipment. The S2000Pro digital audio interfaces with a digital audio signal of 24-BIT 192KHz to meet the needs of enthusiasts demanding signal reproduction.
The S2000Pro does not simply the pursue a high rate signal level. The S2000Pro is designed from the start with low-distortion tweeters and woofers to make a truly system-level "low distortion."
The S2000Pro comes package with a professional wireless remote control for easy volume control, input select, EQ mode selection along with other operations. Never get up from your couch for audio adjustments again.
The S2000Pro uses a unique five-pin connector made by Edifier. The connector is made with special care to separate treble and bass signal transmission, as well as, reduce interference. Transparent black metallic yarn, professional wound line with length up to 9.8-feet.
The S2000Pro uses state-of-the-art CSR8645 chipset for Bluetooth 4.0 connection. With a built-in aptX decoder, the S2000Pro generates lossless Bluetooth playback. Enjoy the full quality sound from your laptop, phone, tablet or computer
در صورتی که پاسخ سئوال خود را نیافتید با استفاده از روش های زیر می توانید با ما ارتباط برقرار کنید .